THE. NEW. STANDARD.
Bass is part of the Laney DNA. Founded in 1967 by Lyndon Laney, a bass player, the business was born with a bass in its hand - in Digbeth, Birmingham.
The Digbeth range comprises powerful, feature-laden, top-of-the-range bass amplification and cabinets for the modern player with an eye for vintage, boutique vibes.
Lead Artist: Nathan East
Did you know DIGBETH is the area within Birmingham city centre where the first Laney factory was located?
DB-PRE
Bass Pre-Amp / Distortion
Powerful TILT EQ
Two Channels with BLEND switch - Tube Drive & Volume + Classic FET Tone
3 Band EQ with Triple Mode Low Mid EQ settings
BYPASS / MUTE Switch
TUBE Switch
FX Send & Return
Output
Regulated 9V DC PSU, centre negative, 2.1x10mm connector type. (Not Included)
Phones out
AUX In
DI Out with pre/post source select
Ground Link (Switchable)
Passive Input
Active input
Link out
0.75 kg / < 2 lbs
DB200-210
200 W RMS Bass Combo
2 x 10’’ HH Blue label woofers
1" LaVoce Compression Driver
2 channels, mixable
FET Pre-amp
Tube / FET Switch
Tube pre-amp with drive (Foot switchable via FS2-Mini)
Tube VOLUME with
PULL Tube / FET MIX control
4 Selectable MID pre-shape EQ curves
with level control
TILT overall EQ Control
Ground Lift
XLR Balanced DI out - Pre/Post selectable
3.5 mm Headphone Out
3.5 mm Stereo Aux IN
FX loop
Minimum Load 4 Ohms
18.5 kg / 41 lbs
DB200H
200 W RMS Bass Head
2 channels, mixable
FET Pre-amp
Tube / FET Switch
Tube pre-amp with drive (Foot switchable via FS2-Mini)
Tube VOLUME with
PULL Tube / FET MIX control
4 Selectable MID pre-shape EQ curves
with level control
TILT overall EQ Control
Ground Lift
XLR Balanced DI out - Pre/Post selectable
3.5 mm Headphone Out
3.5 mm Stereo Aux IN
FX Loop
Combi Speaker Socket (Speakon Compatible twist lock and 6.3 mm Jack)
Minimum load 4 Ohms
4.1 kg / 9 lbs
DB500H
500 W Class ‘D’ Bass head
2 channels, mixable
FET Pre-amp
Tube / FET Switch
Tube pre-amp with drive (Foot switchable via FS2-Mini)
Tube VOLUME with
PULL Tube / FET MIX control
3-Band EQ with selectable MID pre-shape EQ curves and level control
TILT overall EQ control
RUN / MUTE switch
Ground lift switch
XLR Balanced DI out - Pre/Post selectable
6.35 mm Headphone Out with Level control
3.5 mm Stereo Aux IN with Level control
Switchable FX loop
Tuner socket
Footswitch socket for FS2-Mini (drive & mid EQ)
Combi Speaker Socket (Speakon Compatible twist lock and 6.3 mm Jack)
Minimum 4 Ohms
7.1 kg / 16 lbs
DBV810-4
Classic, stage-ready 810 cab
Warm, Punchy, Vintage tone
1200 W
8 x 10’’ HH Black Label Ceramic speakers
4 Ohm
Multi-layer plywood construction
Twist-lock Combi Socket (Speakon compatible twist and 6.3mm jack)
80mm Castors
Kick plate
Side mounted grab handles
Rear pull-back bar
Pairs perfectly with the DB500H
59.5 kg / 131 lbs
DBV410-4
Classic, stage-ready
Vertical format 410 cab
Small footprint – big sound
600 W
4 x 10’’ HH Black Label Ceramic woofers
+1’’ LaVoce Compression driver (switchable ON/OFF & FULL/HALF)
4 Ohm
Multi-layer plywood construction
Twist-lock Combi Socket (Speakon compatible twist and 6.3mm jack)
80 mm Castors
Kick plate
Side mounted grab handles
Rear pull-back bar
Pairs perfectly with the DB500H or DB200H
32.7 kg / 72 lbs
DBV212-4
Classic, stage ready 212 cabinet
500 W
2 X 12” HH Black Label Ceramic Drivers
+ 1’’ LaVoce Compression driver (switchable ON/OFF & FULL/HALF)
4 Ohm
Combi Socket (Speakon compatible twist and 6.3MM jack)
Side mounted grab handles
Multi-layer plywood construction
Twist-lock Combi Socket (Speakon compatible twist and 6.3mm jack)
Pairs perfectly with the DB500H or DB200H
30 kg / 66 lbs
DBC410-4
Classic, stage ready 410 cabinet
400W
4 X 10” HH Blue Label Drivers
1 X LCT-1 Piezo horn switchable on/off
4 Ohm
Wood construction
Twist-lock Combi Socket (Speakon compatible twist and 6.3mm jack)
Modern, fast-attack, mid-range punch
Pairs perfectly with the DB200H
Watching this video will help you answer the below module questions.
Did you know the DBV410-4 gives superior performance with a smaller footprint than a traditional 410 cab?
To complete this module, please enter your email address & name, then answer the 5 questions and finally click submit.
Once complete, scroll up the questionnaire and click 'View results'.
Finally, click Progress at the bottom of this page to continue onto the next module.
↓ Click 'Progress' below ↓