FORGED IN IRON.
Forged deep in the Black Country, England, the IRONHEART range continues the legacy of amps such as the Laney KLIPP and AOR.
Packed full of features, amazing tone with a thoroughly modern and aggressive look,
the Ironheart models are extremely versatile modern amplifiers.
Lead Artists: Vernon Reid & Martin Miller
Did you know Ironheart is named after the product that was historically produced in our local area, which is at the heart of both England and the Industrial Revolution? An area historically covered in iron smelting works.
IRT-120H
120 W all-tube head
ECC83/12AX7 Pre-amp tubes
4 x 6L6 Power amp tubes
3 channel + Boost:
Clean Volume - shares Rhythm EQ
Rhythm Channel with Gain & Master Volume, 3-band EQ with pull Q on Bass, Middle & Treble
Lead Channel with Gain & Master Volume, 3-band EQ with
pull Q on Bass, Middle & Treble
Boost - footswitchable on all three channels
Master Controls:
Dynamics - controls speaker dampening (should be used opposite to Wattage control - Low for High Wattage / High for Low Wattage)
Tone - Overall tone that works like the Tone obn a guitar
Reverb - controls level of the Studio Quality Reverb
VariWatt - Variable wattage control from 120 W / <1 W
Switchable FX loop
D.I. after power stage
On-board cabinet emulation
1 x 4 Ohm, 1 x 8 Ohm & 1 x 16 Ohm speaker options
2 x 8 Ohm & 2 x 16 Ohm speaker options
Supplied with dedicated FS4, 4-Way footswitch (Clean/Rhythm/Lead/Boost/Reverb)
IRT-60H
60 W all-tube head
ECC83/12AX7 Pre-amp tubes
2 x 6L6 Power amp tubes
3 channel + Boost:
Clean Volume - shares Rhythm EQ
Rhythm Channel with Gain & Master Volume, 3-band EQ with pull Q on Bass, Middle & Treble
Lead Channel with Gain & Master Volume, 3-band EQ with pull Q on Bass, Middle & Treble
Boost - footswitchable on all three channels
Master Controls:
Dynamics - controls speaker dampening (should be used opposite to Wattage control - Low for High Wattage / High for Low Wattage)
Tone - Overall tone that works like the Tone obn a guitar
Reverb - controls level of the Studio Quality Reverb
VariWatt - Variable wattage control from 120 W / <1 W
Switchable FX loop
D.I. after power stage
On-board cabinet emulation
1 x 4 Ohm, 1 x 8 Ohm & 1 x 16 Ohm speaker options
2 x 8 Ohm & 2 x 16 Ohm speaker options
Supplied with dedicated FS4, 4-Way footswitch (Clean/Rhythm/Lead/Boost/Reverb)
IRT30-112
30 W All-Tube COMBO
ECC83/12AX7 Pre-amp tubes
6L6 Power amp tubes
3 channel + Boost:
Clean Volume - shares Rhythm EQ
Rhythm Channel with Gain & Master Volume, 3-band EQ with pull Q on Bass, Middle & Treble
Lead Channel with Gain & Master Volume, 3-band EQ with pull Q on Bass, Middle & Treble
Boost - footswitchable on all three channels
Master Controls:
Dynamics - controls speaker dampening (should be used opposite to Wattage control - Low for High Wattage / High for Low Wattage)
Tone - Overall tone that works like the Tone obn a guitar
Reverb - controls level of the Studio Quality Reverb
VariWatt - Variable wattage control from 120 W / <1 W
Switchable FX loop
D.I. after power stage
Extension Speaker Socket - 8 & 16 Ohm
Supplied with dedicated FS4, 4-Way footswitch (Clean/Rhythm/Lead/Boost/Reverb)
IRT-SLS
ECC83/12AX7 Pre-amp tubes
Digital power section
Power switching - 3 - 300 W or 1 - 60 W RMS
Everything the IRT120H has +
T-USB recording interface (PC, MAC, iPad, Android compatible)
Switchable FX loop
D.I. after power stage
On-board cabinet emulation
Variable Voltage
Switchable Impedance Speaker Output via Combi Speaker Socket
- 1 x 8 Ohm, 2 x 16 Ohm, 2 x 8 Ohm / 1 x 16 Ohm
Ultra-powerful – 300 W
Ultra-compact – 3.5 kg
The Ultimate Touring Rig
IRT-STUDIO
15 W All-Tube head
ECC83/12AX7 Pre-amp / EL84 Power tubes
15 W – <1 W inputs
Everything the IRT120H has +
T-USB recording interface (PC, MAC, iPad, Android compatible)
Switchable D.I. (after power stage)
On-board Cabinet emulation
USB record / Re-amp
Phones / Level
AUX In (Mini Jack)
Switchable FX Loop
8 OHM or 16 OHM speaker out
Supplied with dedicated FS4, 4-Way footswitch (Clean/Rhythm/Lead/Boost/Reverb)
IRF-LOUDPEDAL (NEW 2023)
60 W Pedal Amp with the legendary IRONHEART Tone
Twin Channel
Channel 1: selectable Clean / Rhythm / Lead gain modes
Channel 2: selectable Bright, Natural and Dark voicing
Shared 3 BAND EQ
Transformer isolated high quality effects loop
Connect to a cab (GS112IE, GS212IE or even GS412IA)
Use it to record without a cab
Use it as a BOOST / Distortion pedal
Go direct to PA or IEM (In ear monitors)
High-quality speaker emulated XLR out
Foot switchable Boost
Comes with Power Supply
Used by – Stephen Platt
GS412IA
Angled-front 412 cabinet designed for use with all guitar amp heads
4 x 12’’ Custom-Designed HH speakers
320 W RMS
16 OHM
6.33 mm Input & Link Out sockets
Castors Included
GS412IS
Straight-front 412 cabinet designed for use with all guitar amp heads
4 x 12’’ Custom-Designed HH speakers
320 W RMS
16 OHM
6.33 mm Input & Link Out sockets
Castors Included
GS212IE
212 cabinet designed for use with all guitar amp heads
2 x 12’’ Custom-Designed HH speakers
160 W RMS
8 OHM
6.33 mm Input & Link Out sockets
GS112IE
112 cabinet designed for use with all guitar amp heads
12’’ Custom-Designed HH speaker
80 W RMS
8 OHM
6.33 mm Input & Link Out sockets
Watching this video will help you answer the below module questions.
Did you know that the tube models IRT-STUDIO, IRT-SLS & L5-STUDIO have studio interfaces that connect directly into the DAW without needing a load or speaker attached, and allow endless re-amping without latency issues or CPU usage?
To complete this module, please enter your email address & name, then answer the 5 questions and finally click submit.
Once complete, scroll up the questionnaire and click 'View results'.
Finally, click Progress at the bottom of this page to continue onto the next module.
↓ Click 'Progress' below ↓